Connect your home.

1Steps

1. Add a home connection in Devices.
2. Enter your Home Assistant address and an access token created in its profile.
3. Verify the connection, refresh devices and choose one.
4. Create a flow from its card.
5. Check command acceptance and read-back separately in History.
6. Real home hardware acceptance is ongoing.

2Limits

• Use the key you generated from Home Assistant profile. The key is stored in the encrypted data vault on the device and is not included in backups.
• Add your devices in Home Assistant first, then tap Refresh states. Only supported devices are listed.
• This is the last known state. Check that the device is powered on and connected, then refresh its state.
• No supported control commands are available for this device.
• Command may have been sent. Device result could not be verified; automatic retry was not performed.

Next